Schneider Electric TeSys D Contactor LC1D65A | 3-Pole (3NO), AC-3 65A, <= 440V EverLink Industrial Motor Control Switch

Schneider Electric TeSys D 3-Pole Automatic Contactor (Model: LC1D65A) is an industrial-grade, heavy-duty magnetic switching device engineered to deliver premium operational control over heavy electric motors, commercial HVAC ventilation arrays, and severe inductive loads. Fully optimized for high-stress $AC-3$ utilization categories, this high-performance contactor manages a continuous operational current of 65A for motors up to 440V AC, providing the precise electrical calibration required to run standard 30 kW (40 HP) to 37 kW (50 HP) 3-phase induction motors at 380V/400V.

Belonging to Schneider Electric’s world-renowned TeSys D flagship range, the LC1D65A packs massive current capacity into a space-saving 55mm frame size equipped with patented EverLink terminal blocks. This technology ensures permanent, dynamic tightening pressure on power cables, completely eliminating the risk of wire arcing or loose terminal hot-spots caused by copper creepage or continuous physical panel vibrations. Built with a high-integrity 3NO (3 Normally Open) main power pole architecture, the LC1D65A includes integrated auxiliary contacts (1NO + 1NC) as standard to facilitate immediate electrical interlocking, remote status feedback, or automated PLC control logic. Engineered with advanced arc-chute grids and high-grade silver-nickel alloy contact tips, it withstands demanding high-frequency duty cycles under harsh, high-temperature environmental parameters. Fully compliant with international safety benchmarks including IEC/EN 60947-4-1, this premium block mounts easily onto standard DIN rails or mounting plates, establishing itself as the definitive professional choice for heavy industrial water pumps, exhaust fan arrays, large conveyor lines, and commercial elevator panels across Egypt.

Note: The complete structural part number varies depending on your required control circuit voltage coil (e.g., LC1D65AM7 for 220V AC, LC1D65AP7 for 230V AC, LC1D65AB7 for 24V AC, or LC1D65ABD for 24V DC).

Key Technical Features:

• 65A Operational Current (AC-3): Precision-calibrated for continuous-duty starting, reversing, and stopping of heavy 3-phase induction motors up to 440V.

• AC-1 Resistive Load Rating: Capable of handling a massive 80A (at <= 60°C) for non-inductive resistive applications like industrial heating blocks and large lighting arrays.

• Patented EverLink Technology: Advanced terminal block separations ensure constant cable tightening pressure, eliminating local hot-spots and connection failures.

• Built-in Auxiliary Contacts: Features integrated 1NO + 1NC auxiliary links for seamless electrical interlocking, safety feedback loops, and automation telemetry.

• Robust Multi-Standard Screw Terminals: Heavy-duty power terminals ensure consistent, high-torque clamping, eliminating loose wire arcs under continuous site vibration.